Sansui A-M7 Manual De Instrucciones página 4

=
=
and,
O
=
Lad
Connection Precautions
When connecting, either disconnect the power plug from the power
outlet or turn off the unit's power using the POWER switch.
* Before connecting, read through the Operating Instructions of the
other audio components which will be connected to this unit.
* Check the left and right channels and connect properly (L to L and
R to R).
* Insert the plugs securely. Improper connection can lead to the genera-
tion of noise.
AC OUTLETS
Power is supplied to the auxiliary AC OUTLETS on the rear panel when
the power cord is connected to a household AC outlet. It's a good idea to
connect the power plugs of the tape deck, tuner and other components
connected to the amplifier to these outlets.
The SWITCHED outlet is coupled to the amplifier's POWER switch
which controls its ON and OFF operations. Its maximum capacity is
100 watts.
The UNSWITCHED outlet is not controlled by the POWER switch; its
capacity is 200 watts.
Connecting electrical appliances with a power consumption exceeding
these ratings is extremely dangerous. Check the ratings before connec-
tion.
Ne N e NEY Ne NR ND ND ND ND ND
NOTE: Depending on the laws and regulation enforced locally, models
without AC outlets may be supplied to some areas. Also, depending on
the sales area, the shape of the AC outlets and their capacity may differ.
ee Ae Oe TR NOD Ne Ne Ne Ne ND Le Ne Ne ND ND NR ND NL NY
Speaker System Connections
Connect the left channel (on the left when viewed from the front) speaker
system to the SPEAKERS L terminals and the right channel system to
the R terminals.
Connect the (+) speaker terminals to the red (+) terminals on the speaker
system and the (—) speaker terminals to the black (—) terminals. If these
polarities are not aligned properly, the sound of the instruments will be
not be positioned stably, the sound in the center will appear lacking and
a true stereo effect will not be obtained.
SPEAKERS
Right speaker Left speaker
LOCK LOCK
oe) Gy @
* When connecting, do not allow the conductor of the speaker cords to
be exposed from the terminals and come into contact with other
terminals.
* Speakers with an impedance ranging from 8 to 16 ohms are com-
patible with this amplifier. Using a speaker system with an impedance
of less than 8 ohms will cause the internal temperature of the unit to
rise and may cause malfunctions or a breakdown.
Turntable Connections
Connect the turntable's output cord L (white) plug to the L PHONO ter-
minal and the R (red) plug to the R terminal. Connect the ground wire
to the GND (ground) terminal.
Tuner Connections
Connect the tuner's output cord L (white) plug to the TUNER L termi-
nal and the R (red) plug to the R terminal.
Tape Deck Connections
Recording connections: Connect the tape recording (REC) terminals to
the recording input (LINE IN) terminals on the tape deck using the
pin plug cord.
Playback connections: Connect the tape playback (PLAY) terminals to
the playback output (LINE OUT) terminals on the tape deck using
the pin plug cord.
There are two sets of tape terminals on this unit. Connect 'the second
tape deck to the TAPE-2 terminals.
pTAPE-15 rTAPE 24
REC PLAY REC PLAY
LINE IN: LINE OUT
AUX Terminals
The auxiliary input (AUX) terminals have the same electrical perform-
ance as the tuner or tape terminals. Use them to connect a second stereo
tuner or a tape player. Connect the AUX terminals with the OUTPUT
terminals on the component using the pin plug cord.