Publicidad
Idiomas disponibles
Idiomas disponibles
US
High-temperature warning (
If it appears on the screen, do not worry, the battery will restore automatically after cooling.
Low-temperature Warning (
If it is displayed on the screen, do not worry. It will automatically restore after the ambient tempera-
ture is restored.
Basic Operations
Power On/O
AC Output On/O : Press the AC Button, the AC Output operation indicator lights up. Then you can
connect the equipment that needs AC charging. Press the AC Button again to turn o the AC Output.
USB Output On/O : Press the USB Button, the USB Output operation indicator lights up. Then USB-A
and USB-C Output Ports can be connected to external load devices. Press the USB Button again to
turn o the USB Output.
Car Port On/O : Press the Car Port Button, the Car Port operation indicator lights up. Then the Car
Port can be connected to the external load devices. Press the Car Port Button again to turn o the
output.
LCD Screen On/O
To Turn On, press the DISPLAY Button, any Output Power Button, or LED Light Button. Or, when there's
a charging input, the screen display will light up automatically.
To Turn O , press the DISPLAY Button again and the screen display will turn o . Or, if there is no
operation in 30 seconds, the product will enter a sleep state and the screen display will automatically
turn o .
To get the screen always-on (under charging or discharging state), follow these steps: After the
display screen lights up, double-click the DISPLAY Button and the mode of Always-On Display will be
on.
To turn o Always-On Display, follow these steps: Press the DISPLAY Button and the screen will be
turned o in 30 seconds.
Tip:During Always-On mode, the screen automatically turns o after 2 hours without charging or
discharging.
LED Light On/O
There are three modes of LED Light: Low Light mode, Bright Light mode, and SOS mode.
The operations are as follows: Press the LED Light Button, the LED will be turned on. The light will
always turn on in Low Light mode and the output power on the screen is 1W. Press again to enter the
Bright Light mode and the output power on the screen is 3W. Press the third time to enter the SOS
mode and the output power on the screen is 3W. Then, press again to turn o the LED Light. In any of
these modes, the light can be turned o by a long press.
CHARGING YOUR
JACKERY EXPLORER 880 PRO
Green energy first: We advocate to use the green energy first. This product supports two modes of
charging at the same time: solar charging and AC wall charging.
When AC wall charging and solar charging are turned on at the same time, the product will give
priority to solar charging and both methods will be used to charge the battery at the maximum
permissible power.
04
) :
) :
Publicidad
