Publicidad
2 Install the camera
Fix the camera
Tips
− Please make sure the wall or the ceiling is strong enough to withstand three times the weight of
the camera.
− You may need to prepare a hammer drill, a drill bit, a rubber hammer, a screwdriver, and a
ladder for the installation.
The camera supports wall and pendant mounting. The mounting bracket
of wall mounting is included in the package. If you want to install the
camera by pendant mounting, please purchase the bracket by yourself.
The wall mounting is taken as an example here.
❶
❸
Unfasten the horizontal adjustment screw on
the bottom, rotate the swing bracket to a
suitable angle, and then fasten the screw.
Horizontal adjustment screw
❺
Install the camera (Running the cable
through the wall is taken as an example)
M6*25mm self-tapping screw
Marker pen
Swing bracket
Vertically adjust
Vertical adjustment
screw
Anchor
❷
❹
❻
Adjust the monitoring direction and fix the
camera
Horizontally adjust
Horizontal adjustment screw
M6*6mm machine screw
Publicidad
