Incorrect connection.
"EQ off".
The recording mode selector of the equalizer is
The equalization mode-select button is set to
set to the "off" position.
The input selector of the equalizer is set to the
"tape" position.
Refer to page 4 and to the Operation
Instructions of the amplifier.
Set to "EQ on".
Set it to the "on" position.
Set it to the "source" position.
Wipe once again with a soft, dry cloth.
Frequency response
(center position):
Maximum output voltage:
5 Hz~100 kHz (—3 dB)
8 V (1 kHz, THD 0.03%)
at 1 V output
0.003% (1 kHz) at 7 V output
98 dB/1 V, DIN 45 500
47 kQ
0+1 dB
Signal-to-noise ratio:
Input impedance:
Gain:
—M-
Equalization-level
controls:
+12 dB~—12 dB
(7 frequency ranges, in 2 dB steps)
63 Hz, 160 Hz, 400 Hz, 1 kHz,
2.5 kHz, 6.3 kHz, 12.5 KHz
Center frequencies:
GENERAL
Power supply
For Continental Europe: AC 50/60 Hz, 220 V
For others:
AC 50/60-Hz, 110 V/127 V/
220 V/240 V
Power consumption:
11W
:
(with power switch
"standby";
6.5 W)
Dimensions (WXHXD):
430x102x280mm
Weight:
2.9 kg