Publicidad
Idiomas disponibles
Idiomas disponibles
HSHFIONI
full range
displays the combined level
of all of the frequency
ranges.
Display section
[A] Equalization/Spectrum display
Note:
The following equalization-level display and three types of
{f an equalization level-control or the memory-mode selector
spectrum display are possible.
or a preset-memory button is pressed during any display other
than the equalization-level
display, the equalization-level
display will be shown for about five seconds, after which the
former display will return.
Equalization-preset indicators ([1]|-[6)
The indicator corresponding to the pressed preset-memory
button will illuminate.
manual:
Indicates an equalization curve that you program-
med into the memory.
m@ Equalization-level display
The amount of correction is displayed by a series of lines (=)
for each sound range (frequency range).
Fi
&
&
£
:
fixed:
Indicates one of the six equalization curves that
m@ Spectrum displays
were originally programmed into the memory.
Bar-type display
This display can be used to show the output strength for each
Equalization-memory indicator (memory)
sound
range
(frequency
range),
and
to show
the output
This indicator illuminates when the memory button is pressed,
strength of sound for all ranges (full range) by a bar-type
thus indicating that an equalization curve can be programmed
display.
into the memory.
[D] Memory-mode indicators
:
fixed:
Indicates that one of the equalization curves that
were originally programmed into the memory can
be retrieved.
manual:
Indicates that an equalization curve that you
switched ON.
EQ off:
indicates that the equalization effect has been.
switched OFF.
[F] Reverse indicator (reverse)
This indicator illuminates when the reverse button is pressed,
Publicidad
