Publicidad
Idiomas disponibles
Idiomas disponibles
approx. 15 seconds (the entire display flashes every 5 seconds, after
the third flash, release the buttons.
All LED strips will flash 3 times and the + / − but-
tons will start flashing steadily, the device will go
into PAIRING MODE for 5 minutes.).
NOTE: from now on, the device broadcasts its network address (sig-
nal) and is seen by the SMART application.
c. Launch the SMART application and go to the Devices screen.
d. Select the + button and follow
the instructions in the applica-
tion (first scan the code from
the sticker on the device (Fig.3)
or enter it manually, select the
local Wi-Fi network and enter
the router password, then from
the list of available devices, se-
lect the device currently being added).
e. When the automatic part of the process is over, select the appropri-
ate zone in the application (or create a new one) and enter the de-
vice name and other data.
5. Before mounting the head on the radiator press the '-' button for 5 sec-
onds to activate the maximum opening mode of the head.
6. Install the head on the valve.
NOTE: If the valve does not fit the head, use an adapter
7. The Terma VAZ Smart thermostatic head is ready for operation.
6
Publicidad
