Maintenance; Machine Specifications - Clarke American Sanders 1600DC Manual Del Operador

ENGLISH
EN

MAINTENANCE

WARNING: Maintenance must be done by authorized personnel only.
CAUTION: Keep all adjustments according to specifications.
Maintenance Instructions
Return the machine to a Clarke American Sanders Authorized Service Location every 12 months for maintenance inspections.
Switches
WARNING: All electrical repairs must be done by authorized personnel only. The machine must be tested after electrical
repairs to make sure it is safe to operate. Disconnect the electrical plug from the electrical outlet before doing any electrical
repairs.
The start and stop switch has an interlock which prevents the contacts from being closed. If any part of the switch is not operating,
replace the part. If any part of the electrical system of the machine is not operating or is damaged, replace the part. Make sure all
connections are tight. Return the machine to the Clarke American Sanders Service Branch or a Clarke American Sanders Authorized
Service Center for electrical repairs or testing.
Maintenance Of The Motor
Induction type motors do not require motor brushes.
If repairs to the gear unit or motor are needed, do not disassemble the gears and motor. Return the machine to the nearest Clarke
American Sanders Service Branch or Clarke American Sanders Authorized Service Center.
For safe operation, and longer life to your Clarke American Sanders product, use only Clarke American Sanders parts.
NOTE: The grease (503802) for the gear box needs to be changed every year. The Sander 1600 and 1600DC require 8 oz. of grease.

Machine Specifications

Model
Code Number
Voltage (Volts)
Frequency (Hz)
Current (Amps)
Power (hp)
Pad Diameter
Pad Speed (rpm)
Cord Length (feet)
Weight (pounds)
-10-
Sander 1600DC
07101B
120
60
14
1.5
16.0
175
50
121
Clarke American Sanders Operator's Manual (EN) - Floorcrafter
®