Elite RACE FC Instrucciones página 9

EN
6. To increase Workstand stability please align the bicycle
support arm with one of the three legs so that the weight
is evenly distributed on the structure. (Pic. 14A - Pic.14B)
You are now ready to use the Race Workstand.
FOLDING THE WORKSTAND
1. Remove the bike from the stand by releasing the nylon
strap and the QR on the dropouts.
2. Remove the safety pin and press the release trigger to
allow the support arm to fold down (Pic.15).
3. Fold the legs.
Note that the support arm trigger cannot be pressed when
a bike is mounted on the stand to prevent accidental folding
of the support arm Pic. 16 and Pic.17).
Please always insert the safety plug to avoid unintentional
or accidental closure of the Workstand.
The Race Workstand is now ready to go wherever you do.
(Optional) Open the height adjusting knob and the quick
release on the plastic ring and slide the vertical tube
downwards; once it leans on the ground, raise the central
joint to the max with the legs unfolded and close the height
adjusting knob.
9