Create Record Player Compact Manual De Instrucciones página 7

•
Do not place anything on the record player cover. Objects on the cover might cause
noise due to vibrations or fall off, especially during playback.
•
Avoid placing the unit in direct sunlight, close to a source of heat or in other similar
conditions. Do not place the unit on top of an amplifier or other equipment that mi-
ght generate heat that exceeds the operating temperature range of this unit. Doing
so could cause discoloration, deformation or malfunction.
•
As the unit could become warm during operation, always leave sufficient space
around it for ventilation. When installing this unit, leave a little space (at least 20
cm) between it and other devices and walls to allow good heat dissipation. When
placing it in a rack, for example, leave at least 35 cm open above it and 10 cm open
behind. Failure to provide these gaps could cause heat to build up inside and result
in fire.
•
Do not move the unit during playback. During playback, the record rotates. Do not
lift or move the unit during playback. Doing so may damage the record, the stylus,
the cartridge or the unit.
•
Always remove the record before relocating or moving this unit. Moving the unit
with a record on the record player could damage the record, the stylus and the car-
tridge or could cause a malfunction.
•
The voltage supplied to the unit should match the voltage as printed on the rear pa-
nel. If you are in any doubt regarding this matter, consult an electrician.
•
In USA/Canada, use only 120V supply.
•
The lightning flash with arrowhead in an equilateral triangle is inten-
ded to alert the user to the presence of uninsulated "dangerous volta-
ge" within the product's enclosure that could be of sufficient magni-
tude to constitute a risk of electric shock to persons.
•
The exclamation point in an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
E NGLI SH
7