1. Error indicator light
2. Error indicator light
(green/red)
Normal condition
Built-in battery too low to start
Built-in battery charged enough to start
The friction coefficient is too big or too small
during the self-inspection
Power off
Low suction
Hardware trouble
Window cleaning is completed
10
E NGL I SH
LIGHT AND SOUND INDICATIONS
REMOTE CONTROL
Pause/Continue
Move up to the end of the glass
Move down to the end of the
glass
Move left to the end of the
glass
Move right to the end of the
glass
1
The error indicator (red/green) keeps on
in green.
The indicator is on in red.
The red indicator turns off.
The indicator is on in red and it emits a
short and continuous sound.
The error indicator (red/green) is
flashing red and green alternately. The
alarm sound is on.
Long alarm sound repeated for three
times.
Cleaning once
Cleaning twice
Continue to clean and move up
from the current position
Continue to clean and move left
from the current position
Continue to clean and move
right from the current position
2