Publicidad
Idiomas disponibles
Idiomas disponibles
1. When the error indicator is flashing red with continuous and short sounds, please inspect if:
• the plug of the power cord is loosened or damaged and results in power off or poor contact;
• the glass or mop is too wet and results in too low friction;
• the glass has impurities attached and results in too high friction;
• the mop holder is incorrectly installed and results in air leakage;
• the suction port is blocked.
2. The error indicator is flashing red and green alternately with alarming sound. It means trou-
ble occurs on the inside hardware of the robot, please contact the customer service directly.
On the condition of special glass, when cleaning the bottom of glass, it needs more time for
cleaning up, please use remote control.
3. When the robot is moving up, it can't reach the upper positon of the glass due to slipping,
please press the Pause Button, and control the robot by the buttons of
remote control to continue the cleaning to left/right direction.
4. In the case of the robot can't walk freely, please change the mop or inspect the screws on the
cleaning roller, ensure they are not loosened.
5. After cleaning, there's residual round marks on the glass surface, please change a new mop,
and spray the cleaning agent to the lower mop holder 2-3 times.
6. After completing the whole process of cleaning, the robot continues to move and doesn't
stop automatically, press the Pause Button and take it down.
7. When it is in use, maybe bug occurs occasionally, please restart the robot as the solution.
• In case of sand and dust on the surface of the glass, please clean it with a dry mop; otherwise,
the wet mop will mix with the sand and dust, and scrape the glass.
• When there are no sand and dust, lightly spray several times with clean water or cleaning
agent on the mop or glass, don't make it excessively wet.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
TROUBLESHOOTING
CLEANING
and
on the
E NGLI SH
11
Publicidad
