Publicidad
Idiomas disponibles
Idiomas disponibles
DUBBING A TAPE MANUALLY
DUBBING THE WHOLE TAPE
3
2
5
1,4
2
Em3
Set the tape to the point where recording will start.
The reverse mode is automatically set to 1.
Note that recording will be done on one side of the tape only
1
2
3
4
5
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
Press the DOLBY NR button to turn off the Dolby
NR.
00
NR on the display goes out.
Press
the TAPE/DECK
1/2 button
to select
deck 1.
"TP 1" is displayed.
Press
the
REC/REC
MUTE
button
to start
recording.
Playing and recording start simultaneously.
To stop dubbing
Press the H button,
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
1
2
This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
m
Dubbing does not start from a point halfway in the tape.
The reverse mode is automatically (jet to 11.
The Dolby NR does not affect recording.
1
2
3
Press the TAPE buttcm.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
Press the SYNC DUB Ibutton once or twice to start
recording.
6)
For recording at normal speed, press it once to display
NORM-DUB.
@) For recording at highl speed, press it twice to display
HIGH-DUB,
o
@
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press the
button,
To set the Dolby NR when playin!g back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
m
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
ENGLISH i
6
Publicidad
