Celexon Adjust-42100M Manual De Instrucciones página 17

STEP 3 I INSTALLATION CABLE MANAGEMENT TRAY AND WIRING
Mount the cable management as shown in fig. 8 with the M6x10 screws in the
threaded bushes of the lower cross strut.
Then wire the electrical components. First connect one motor with the
extension cable and then plug both motor cables into the controller. Then
connect the controller to the power supply unit and connect the control
element to the controller.
Attach the components to the cable management tray.
(You can fix the controller with the 2 M5x15 and the M5 locking nuts).
Fig. 9
Fig. 8
Example of wiring:
Fig. 10
6