Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 4 I MOUNTING THE DISPLAY
Mount the VESA brackets on the display. Use only screws according to the
manufacturer's instructions for your display.
(For safety reasons, the screws are not included in the scope of delivery).
Hang the display on the upper rail of the trolley (Attention: it is correct that
the display hangs at an angle at first). Now pull down the lift-out locks on both
sides so that the display is in its final position. Release the anti-lift device and
the display will be fixed to the lower strut.
Then fix the two VESA brackets to the top rail with 2 screws (M6x10).
Fig. 11
Fig. 13
Fig. 12
Fig. 14
Fig. 15
7
Publicidad
