Publicidad
OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
OPERATING MANUAL AND INSTRUCTIONS FOR ELECTRIC SCREWDRIVER EVOX-E,
MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the user.
PURPOSE OF USE
- The electric screwdriver can be used for the following purpose:
• screwing/unscrewing screws
- The electric screwdriver must not be used for the following operations:
• use for any applications other than stated ones.
WORK AREA SAFETY
Use the electric screwdriver away from rain and humidity.
Do not operate the electric screwdriver in environments containing potentially explosive atmospheres, because sparks
may be generated which can ignite the dust or fumes.
Avoid contact with live equipment, as the electric screwdriver is not insulated, and contact with live parts may cause
electric shocks.
Keep children and bystanders away from your workplace while operating the electric screwdriver. Distractions from other
people can cause you to lose control over the tool.
PERSONNEL SAFETY
or medication.
- While the electric screwdriver is being used, any accidental breakages of individual accessories may cause pieces to be thrown
at high speed. Use suitable PPE (see section "Personal protective equipment").
- Avoid contact with any moving parts of the electric screwdriver, since these can cause injuries.
- While operating the electric screwdriver, make sure you are in a safe position, keeping proper balance at all times. A safe working
position and a proper body posture enable better control of the electric screwdriver in unexpected situations.
- Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
ELECTRIC SCREWDRIVER USE AND CARE
- Do not overload the electric screwdriver.
- Always check that the tool is undamaged. Do not use the electric screwdriver if it is defective. A defective screwdriver is
dangerous.
- Do not modify the electric screwdriver. This can reduce the effectiveness of safety measures and increase operator risk.
- Have the electric screwdriver repaired only through trained staff and only using original replacement parts. For such jobs you
can contact Beta Utensili S.p.A.'s repair centre.
6
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
ELECTRIC SCREWDRIVER. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
EN
I
Publicidad
