Descargar Imprimir esta página

Jole Signature Sprint Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Installation Concerns
1
1
2
3
4
2
3
4
5
6
7
5
6
7
Canopy
see images
-
1
3
Handle Adjustment
see images
-
4
5
1. The infant carrier handle can be adjusted to 3 positions.
2. To adjust the handle, squeeze handle buttons on both sides.
!
Handle has to stay upright when used in the car.
7
Head Support Height Adjustment
see images
!
Shoulder harness straps must be nearest to your childs
shoulders.
!
If the shoulder harness straps are not at proper height, the child
might be ejected from the enhanced child restraint in the event of a
crash.
!
Head support must be installed at all time while using the infant
carrier.
Pull the head support up or down to adjust the position.
Securing Child
in the Enhanced Child Restraint
see images
Note
1. Infant insert is for child's side protection. We recommend using
the infant insert when the baby is under 60cm or until they outgrow
the insert.
After the child is placed into the seat, check whether the shoulder
harness straps are at proper height.
1. To lengthen the shoulder harness belts, press the harness
adjustment button first while pulling forward the shoulder harnesses
4
to loosen.
5
-
6
8
6
7
-
9
13
Remove the infant insert when your
child's shoulders no longer fit comfortably.
9
8
8

Publicidad

loading