Descargar Imprimir esta página

Beurer HK 25 Instrucciones Para El Uso página 13

Almohadilla eléctrica
Ocultar thumbs Ver también para HK 25:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
• The electrical and magnetic fields emitted by this heat pad may interfere
with the function of a pacemaker. However, they are still well below the
limits: electrical field strength: max. 5000 V/m, magnetic field strength:
max. 80 A/m, magnetic flux density: max. 0.1 millitesla. Please therefore
consult your doctor and the manufacturer of your pacemaker before
using this heat pad.
• Do not pull, twist or make sharp bends in the cables.
• If the cable and control of the heat pad are not positioned properly,
there may be a risk of becoming entangled in, being strangled by, trip-
ping over, or stepping on the cable and control. The user must ensure
that excess lengths of cable, and cables in general, are safely routed.
• Please check this heat pad frequently for signs of wear and tear or
damage. If any such signs are evident, if the heat pad has been used
incorrectly or if it no longer heats up, it must be checked by the manu-
facturer before being switched on again.
• Under no circumstances should you open or repair the heat pad (in-
cluding the accessories) yourself because faultless functionality can no
longer be guaranteed thereafter. Failure to observe this will invalidate
the guarantee.
• If the mains connection cable of this heat pad is damaged, it must be
disposed of. If it cannot be removed, the heat pad must be disposed of.
• Do not expose control and cables to direct sunlight.
• When this heat pad is switched on:
– Do not place any sharp objects on it
– Do not place any heat sources, such as hot water bottles, heat
pads or similar, on it
• The electronic components in the control warm up when the heat pad
is in use. For this reason, the control must never be covered or placed
on the heat pad when it is in use.
• Allow the heat pad to cool down before storing it away. Otherwise the
heat pad may get damaged.
• To avoid any creasing in the heat pad, do not place any objects on top
of it while it is being stored. Otherwise the heat pad may get damaged.
• It is essential to observe the information relating to the following chap-
ters: Operation, Cleaning and maintenance, Storage.
• If you should have any questions about using our devices, please
contact our Customer Services department.
13

Publicidad

loading

Este manual también es adecuado para:

Hk 35