Victor 1208-2 Serie Manual De Instrucciones página 3

PREPARATION
A. Power Source
This unit receives its operating power from an AC adaptor 6V DC, 300mA or
4 AA size manganese dry batteries (UM-3). When power is in ON position,
pressing [#0] key will only print the digits displayed in the front display panel.
B. Loading Paper
1) Place paper holders into position (Fig. 1).
) Install the paper roll on the holders.
) Insert the paper end into printer slot (Fig. II).
)
2
3
4) Press [ Î ] key to feed the paper to an adequate length.
Fig. | Fig. Il
C. Replacing the ink Roller
If the printing becomes faint, the ink roller may need to be replaced.
1) Turn the power off.
) Open the printer cover (Fig. Ill).
) Remove the old ink roller by pulling it up (Fig. IV).
) Insert the new ink roller IR-40T in the compartment and gently press it
down until it snaps into place.
2
3
4
Fig. tll Fig. IV
CAUTION: Turn the power off before replacing ink roller.
E3
DISPLAY SYMBOL
- : The display value is negative
DATE AND TIME FUNCTION
Set Date and Time
5) Press SET to confirm the date.
E4