Publicidad
Idiomas disponibles
Idiomas disponibles
HOW
TO
USE
THE
MULTIREG
PEK
——
A. Selection of high or low pressure by push-pull action. The
B. Adjustment from straight (4) to fan (5) of
selection of the pressure must be carried out with the gun
| water jet by simple turning of the MULTIREG
in closed position (1).
a
HOW
TO
USE
THE
CHEMICAL
INJECTOR
ad
>=
2D
E
=
Ne
a
£ A
1. The unit can suck and mix detergents and other liquid
chemicals thanks to an automatic device incorporated n
the unit itself, which is remote controlled by operating the
MULTIREG. The unit is equipped with a chemical suction
kit (Figure A).
2. Fitthe brass connector into the chemical control knob and
filter into chemical container (Figure B).
3. Select low pressure with the MULTIREG (Figure C). At
this point the suction and mixing of the chemical will start
automatically.
4. You can regulate the quantity of nee
by =
alle
the chemical control knob (Figure D).
5. When you wish to stop using chemicals in order to clean
or rinse, simply release the gun trigger and adjust the
MULTIREG to high pressure. At this point the chemical
injection stops.
6. If you foresee not using the unit for a long period of time,
we suggest to clean the chemical suction Kit with clear
|
water to avoid chemical deposit build-up.
7. lf you run out of chemical, the unit will suck air causing
loss of pressure. Refill chemical container.
ANS
EE
Publicidad
