Descargar Imprimir esta página

Barnes BW200 Manual De Instrucciones De Operación Y Piezas página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

CHECKING
AND
CHANGING
THE
OIL
1. The level of the oil must be checked periodically.
2. The first important oil change must be carried out after
the first 20 hours of work and successively every 150
hours.
3. ln any case we suggest an oil change once a year.
Oil type: SAE 20/30. Capacity: 11 fl. oz.
CHECKING
THE
WATER
FILTER
It is important to periodically check and clean the water filter in order to avoid
restricting the water flow due to deposits in the filter screen. Remember that a
well-cleaned filter means good performance and long life of the unit.
I
I
TY
If the unit is to be stored in a place where there is risk of
freezing, we suggest feeding some antifreeze into the
|
pump, similar to that used in your car.
In any case, at very low temperatures if in doubt that some
parts of the unit may be frozen or if the unit has been in
storage for a long time, before plugging in, we suggest
turning the motor shaft with the hex key supplied.
This operation determines if the unit is frozen or blocked
due to lime scale deposits.
By taking these precautions before starting, you will avoid
|
damaging the unit.
|
Remove the hex key before switching on motor.
|

Publicidad

loading

Productos relacionados para Barnes BW200