Publicidad
Idiomas disponibles
Idiomas disponibles
English
Driver Installation
1.
Switch on your computer.
2.
Connect the power supply to the DC female port.
3.
Connect the docking station to an available USB port of your computer.
4.
Download the driver from the product page: https://www.delock.com/
produkte/G_88051/treiber.html.
5.
Follow the instructions of the driver installation.
6.
The driver will now be installed.
7.
Click on "Finish".
8.
Your computer will ask to reboot. Click "Yes" to restart the computer.
9.
After restart you can start using the device immediately.
Configuration
1.
Network connection: Supports 10/100/1000 Mbps and can be used
immediately.
2.
USB ports: You can now connect your devices to these 5 ports.
3.
Audio ports: You can connect your headset and your speakers to the audio
ports.
Note
As soon as an audio device is connected to the stereo jack, the output takes
place exclusively over it. An output via the video outputs is then not possible.
4.
Video ports: You can set the additional displays on mirroring or extended.
In order to change the setting, proceed like this:
Windows: Click with the right mouse button on the desktop and click on
"display settings".
Afterwards you can change the graphics settings.
Mac: Open the System Preferences > Displays.
It can happen that the security settings need to be changed. Therefor go
to System Preferences > Security & Privacy > Privacy and set the hook on
"DisplayLinkUserAgent".
Note
When using the three video outputs at the same time, one monitor is operated via
DisplayPort Alternate Mode, the other two via DisplayLink®. The Delock docking
station can also be operated on devices without a USB Type-C™ port with DP Alt
Mode support, with a video output on a maximum of two monitors.
-6-
Publicidad
