Publicidad
Idiomas disponibles
Idiomas disponibles
•
Connection to battery chargers, solar charge controllers and inverters
•
Stationary or mobile use
•
Indoor use
The display is not suitable for:
•
Mains operation
•
Outdoor use
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
•
Incorrect installation, assembly or connection, including excess voltage
•
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
6
Installation
Mount the display as shown.
Fig.
Connect the display as shown.
Fig.
7
Operation
Proceed as follows:
Press the power knob or tap the touchscreen to switch the display on (A).
Press the power knob or use the power button to switch the display to standby (B).
Using the display
Fig.
on page 3
Pos. in A Compo-
Description
nent
Shows active functions (Bluetooth) of connected N-BUS devices, time and notifications (error mes-
sages).
1
Status bar
6
on page 1
on page 2
Fig.
on page 2
Bluetooth function of connected N-BUS devices
Lights up yellow as soon as the Bluetooth function of connected N-BUS devices is activat-
ed.
Publicidad
