Alpina HB6700FA-N Manual De Instrucciones página 2

A INSTRUCTION MANUAL
STICK BLENDER SET
ITEM NO: 871125247346
Model: HB6700FA-N
220-240V~ 50/60Hz, 1000W
Thank you for purchasing the Alpina 47346.
This document is the user manual and contains all information for
correct, efficient and safe use of the product. This user manual is
addressed to the end user. Read this user manual carefully before
installing or using the product. Always store this information with the
product for use in the future.
Safe usage instructions
When using the electrical appliance, the below basic safety
precautions should be followed:
1. Read all instructions.
2. Before using check that the voltage of wall outlet correspond to the
one shown on the rating plate.
3. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility
for examination, repair or electrical or mechanical adjustment.
4. If the supply cord is damaged it must be replaced by the
manufacturer or a authorized service agent or a qualified
technician in order to avoid a hazard.
5. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
6. Do not let cord hang over edge of table or hot surface.
7. Do not immerse upper part of blender into water as this would give
rise to electric shock.
8. Close supervision is necessary when your appliance is being used
near children or infirm persons.
9. Avoid contacting moving parts.
10. Keep hands and utensils out of container while blending to reduce
the risk of severe injury to persons or damage to the blender. A
scraper may be used but must be used only when the blender is
not running.
11. The appliance cannot be used for chopping ice or blending hard
and dry substance, otherwise the blade could be blunted.
12. To reduce the risk of injury, never place cutting blade on base
without first putting bowl properly in place.
13. Be sure chopper lid is securely locked in place before operating