Alpina HB6700FA-N Manual De Instrucciones página 9

INSTRUCTION FOR BLENDER
Max operation duration per time cannot exceed 1 minute, and 1minute
rest time must be maintained at two consecutive cycles.
1. To assemble the detachable shaft with the motor unit, turn the shaft
anti-clockwise direction until tightened. To disassemble, just turn in
the adverse direction.
2. Simply plug the hand-held blender to power outlet.
3. Lower the hand-held blender into food and depress the switch at
the top of the motor unit.
4. Press and hold the button and then adjust the speed control knob
to adjust the speed.
5. To stop the hand-held blender release the switch at the top of the
motor unit.
INSTRUCTION FOR CHOPPER
Max operation duration per time cannot exceed 30 second, and
1minute rest time must be maintained at two consecutive cycles.
1. Place the chopper bowl on a clean, level surface.
2. Assemble the stainless copping blade into the chopper bowl, as
shown in Fig.1.
3. Cover the connector on the copping blade (see Fig.2).
4. Place food into the chopper bowl.
Note: remove the bone of the meat, cut small piece, then place
the meat into bowl, the max quantity of meat can't exceed 200g in
every blending.
5. Attach the lid onto the chopper bowl and turn it in clockwise
direction until it locks into position. (See Fig.3) To detach the lid,
turn in adverse direction.
6. Insert the top part of the chopper into the hole of the chopper lid,
and turn in clockwise direction to lock. (See Fig.4)
7. Plug the appliance to power outlet and depress the switch to begin
operation.
8. To stop the appliance release the switch at the top of the motor
unit.
Caution:
- To reduce the risk of injury, never place cutting blade on base
without first putting bowl properly in place.
- Be sure chopper lid is securely locked in place before operating
appliance.