Casanoov TANKER B250 Manual De Instrucciones página 11

x1
K
A Drill 2 holes 10.2 mm in diameter with a spacing of 68 to 77 mm between the 2 holes.
B Place the bracket (K) over the drilled holes.
C Place the motor bracket (D) under the gate bracket (K) using the appropriate bolts (O) and tighten
them securely. Please note that the bolts used to secure the front bracket to the gate are not
supplied as the thickness of each gate is different.
D Attach the other end to the gate arm, and insert the locking pin (M) and lock washers (G).
Installation of Motor's Arms to Gates
x2
O
G
x1
D
Lubrication : 1 - 2 times a year
x1
x1
M
EN
11