Descargar Imprimir esta página

Hoover FloorMate Manual página 12

Ocultar thumbs Ver también para FloorMate:

Publicidad

Idiomas disponibles

Idiomas disponibles

Reposition
filter.
Replace
filter lid. Press
down
firmly
until
snapped
in place.
_.,
,J
Dry or loose debris
will also collect
on the filter screen
located
in the tank lid.
To remove
debris
from
screen,
remove
the pleated
filter from the lid. Remove
debris
from screen
(D).
The filter screen may also be cleaned
by rinsing
it under
running
water.
Reposition
pleated filter in lid. Replace lid onto recovery
tank, pressing
down firmly until snapped
in place.
O
To replace
recovery
tank, place bottom
of tank
behind
ledge
(E) and pusI_ tank straight
into cleaner
body
until it is locked
in place.
Recommended
cleaning
sequence
Use your
HOOVER®
FloorMate
TM
SpinScrub
TM
Cleaner
to:
• Dry Vacuum to remove loose dirt, hair and debris.
• Wet Clean the floor surface. The brushes will provide light agitation to help loosen dirt.
• Wet Pickup reduces drying time of the floor surface.
|
"_
The Mode
selector
dial turns
the brushes
on and off.
O
or dry debris
pickup,
turn the dial to the DRY VAC
posi-
tion (A). In this position,
the brushes
will not rotate and are
raised
off the floor surface.
To wet clean
with brushes
turned
ON, turn the dial to the WASH
position
(B).
For wet pickup,
turn the dial to the WET PICKUP
position
(C).
12

Publicidad

loading

Este manual también es adecuado para:

Spinscrub