Descargar Imprimir esta página

HiTRAx WIN Instrucciones Para El Manejo página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

- When the function of the pacer syn. with the chronograph
is activated, the pacer beep sound and the measured distance
is controlled by the chronograph mode.
- The LAP icon will flashing when the no. of lap is overflow.
- The split function is activated. The SPL icon should be flashing
and data keeps for 15 seconds before changing back to
current chronograph value.
- If LAP no. more than 999 the LAP icon plus "999" will be
flashing until user stop the chronograph and reset again.
- Lap time changes the display without 1/100 second after
the value is greater than 9 hr. 59 min. 59.99 sec.
- When chronograph is reached the value 99 59' 59" 99. All
the digits will be flashing until user reset the chronograph.
1.3 Lap Recall Mode
- If there are no any lap record in chronograph mode. All
figures will display zero and no any functions for button
@, O, O.
- There are lap records in chronograph mode.
Press button (©) to recall the lap records from LAP 1 and up.
(Beep, beep for last record).
Press Button (D) to recall the lap records from the shortest
lap to slowest lap record (Beep, beep & FIN icon for last
record).
- Press Button (A) to recall fast, slow and average lap from
total lap records.
14
1.4 Timer Mode
Three timer are provided with preset and user define value
Press Button (A) to select TR1, TR2 & TR3.
TR1 - Timer will auto return and start counting again after
it count to zero.
TR2 - Timer will stop and auto return to the set value after
it count to zero.
TR3 - Timer will count up when it counted to zero. Maximum
count up to 23 hr 59 min 59 sec.
For the last 5 seconds counting, beeps are provided, when
time is up, 20 seconds alarm beeps are provided.
Press 'D' to select one of value in sequence
( User > 3 > 5>
10 > 15
> 30 > 45 > 1 hr > 1 hr 30 min > 2 hrs > User >
3 min >...)
- The user set value will be remained until the user reset the
value one by one.
- Press button © to start or stop.
- Press button (D) to reset the value.
- When the timer start, there are an anti-clockwise segment
moving in right hand lower corner.
1.5 Alarm Mode
There are 3 daily alarm and 2 calendar.alarm:
- Press button (A) for AL-1 to AL-5 selection
- Press button
© for chime turn on or turn off.

Publicidad

loading

Este manual también es adecuado para:

38.2017