Celestron STARPOINTER PRO Manual De Instrucciones página 3

PREPARE TO USE YOUR FINDERSCOPE
1 1
1. Open the battery compartment lid
using a coin, the included multi-tool,
or other flat tool.
4 4
4. Place the battery back in the battery
compartment with the positive (+) side
facing up.
SAFETY INSTRUCTIONS
• There is a risk of explosion if the battery is replaced with an incorrect type.
• The included battery is not rechargeable.
• Only use the battery as originally intended to avoid a short circuit. Connecting the conductive material
directly to the battery's positive and negative sides will cause a short circuit.
• Do not use a damaged battery.
• Do not store the battery in an extremely cold or hot environment. Doing so can reduce battery life.
• When replacing the battery, refer to the instruction manual and ensure the positive and negative sides are
oriented correctly.
• Do not put the battery in fire.
• Dispose of the battery according to local regulations.
2 2
2. Remove the CR2032 battery from
compartment.
5 5
5. Using the coin or tool you used
previously, screw the lid down tight.
StarPointer Pro Finderscope
TM
3 3
3. Peel off the sticker that is blocking the
CR2032 battery's circuit.
ENGLISH | 3