VEVOR BH-001 Manual De Instrucciones página 9

As shown in the figure, there is a 1:1 line diagram printed on the upper and
lower folds of the carton, which can assist installation. It needs to be cut
down and the track circle is hollowed out and placed at the installation
position to draw dots.
NOTE:Users can also choose the installation method according to their
own installation habits, such as measuring the size of the actual object or
comparing the actual object with the actual object after drilling the
installation holes, or other more convenient installation techniques, it
depends on you.
Drill 2 holes on each side of pre-drilled frame holes. Tap the plastic plugs
into the holes. Install the cabinet door,screw into the plastic plugs of the
pre-drilled holes.
Remark：plastic plugs、self-tapping screws need to be purchased
by user,these parts are not included.
- 8 -