Kesser 1220 Instrucciones De Montaje página 11

G. Display
H. Button for ice cube production
I. Tap button to water
J. Turn the device on/off
K. Button to select the ice cube size and set the extended lead time
L. Button to set the on or off timer
Commissioning
7. Remove the packaging material from the device.
8. Remove all stickers and adhesive strips. Open the transparent window and remove
the accessories.
9. Clean the interior (water tank, ice cube pressure spring) with a soft cloth and
lukewarm water.
10. Place the device on a flat countertop, away from direct sunlight and heat sources.
Leave at least 15 cm of space around the device so that the air can circulate
sufficiently.
11. Wait at least 1 hour before turning on so that the coolant can spread.
12. Make sure that the plug is freely accessible at all times.
Service
11. Open the left side door and pour in water. Make sure that the filled water does not
exceed the MAX mark.
12. Plug the plug into the wall outlet. The icon flashes in the display.
13. Press the ON/OFF button on the control panel to start making ice cubes. The icon now
lights up permanently in the display. At the same time, the icon starts flashing. The
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
11
www.eshopping.de