Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 Package contents/device parts
Air outlet
1
Cool shot button
2
Handle
3
Power cord
4
Speed button
5
Temperature button
6
Standby switch
7
Display
8
2.3 Operation
• Clean all parts of the product before first use as
described in the chapter "Cleaning".
• The product may emit a slight smell when it is first
used. This is entirely safe and harmless. Ensure there is
adequate ventilation in the room.
• Always hold onto the handle
product.
1. Connect the power cord
outlet.
2. If necessary, attach one of the attachments (concentrator (small/
wide)
or diffuser
13
The attachments magnetically fix to the air outlet.
3. To switch the product on, slide the standby switch
middle position (ON).
4. To change the operating temperature, press the temperature
button
repeatedly until the desired temperature (39,
6
55, 65, 75, 85 or 95 °C / 102, 131, 149, 167, 185 or 203 °F) is
selected.
The operating temperature shows in the temperature
indicator
10
5. To change the operating speed, press the speed button
repeatedly until the desired speed (3 levels) is selected.
One or more speed indicators
selected speed level (1–3).
6. For a shot of cool air, press and hold the cool shot button
The cool air indicator
activated. Release the button to cancel this function.
4
) to the air outlet
14
of the display
8
illuminates when the function is
9
Cool air indicator
9
Temperature indicator
10
Speed indicator, 3×
11
Lock icon
12
Concentrator, 2× (small/wide)
13
Diffuser
14
Filter
15
Rear cover
16
when using the
3
to an easily accessible power
(see Fig. B).
1
.
illuminate to show the
11
EN
to the
7
5
.
2
8
Publicidad
