Bluetti AC200P L Manual De Usuario página 17

7.3 Car Charging
Connect the AC200P L to the vehicle's 12V cigarette lighter port via the DC input cable and
car charging cable. The AC200P L can charge at a maximum of 96W, and it'll automatically
stop charging once it's fully charged.
Note: Make sure your vehicle meets the following conditions for charging:
•
The vehicle is capable of supplying power.
•
The vehicle's engine is running during the charging process.
Attention:
The AC200P L has a low-voltage disconnect function designed to protect your vehicle's
battery during charging. If the input voltage drops below 10.5V, the unit will automatically
stop charging to prevent over-discharging and potential damage to the battery.
7.4 Generator Charging
Connect the AC200P L to a generator via the AC charging cable. The AC200P L also
automatically stops charging when it's fully charged.
17
EN
JUST POWER ON