Bluetti AC200P L Manual De Usuario página 23

charging switch and scheduled charging switch according to your diverse requirements.
9.8 Grid Self-adaption Mode
If you can not charge the AC200P L using a generator or unstable grid voltage because of
unstable voltage, you can enable the Grid Self-adaption Mode through the BLUETTI App.
9.9 Max. Grid Input Current
The Max. Grid Input Current is set to 15A by default. If the grid current doesn't match this
setting, adjust the setting in the BLUETTI App.
Attention:
The AC200P L allows a maximum grid input current of up to 20A.
If you need to increase the setting beyond the default 15A, please contact BLUETTI
Customer Service and request a password to make the necessary adjustments.
9.10 Exit Setting Mode
To save your AC200P L settings and exit the Setting Mode, press and hold both the DC
and AC Power Buttons at the same time.
Note: If you do not perform any operation in 1 minute, the AC200P L will automatically exit
the Setting Mode, and no changes will be saved.
23
EN
JUST POWER ON