Bluetti AC200P L Manual De Usuario página 22

9.6 WiFi & Bluetooth Connection
To connect the AC200P L to the BLUETTI App, turn on the WiFi or Bluetooth first. In the
Setting Mode, press the DC Power button to navigate through the setting items. When
the icon flashes on the screen, press the AC Power Button to turn Bluetooth on. Similarly,
when the icon flashes on the screen, press the AC Power Button to toggle WiFi on.
9.7 UPS Mode
With the UPS mode enabled, the AC200P L can provide uninterrupted power to your
essential appliances during a power outage. And there are four different modes available
through the BLUETTI App, allowing you to choose the best option for your needs.
•
Standard UPS Mode
In this mode, the AC200P L and its expansion batteries (if any) are always charged using
available solar or grid power, ensuring that they are ready to provide backup power in case
of a grid failure. When the grid fails, the AC200P L unit seamlessly takes over to keep your
devices running without any interruption.
•
Time Control UPS Mode
This mode allows you to program the AC200P L to charge during off-peak hours when
electricity is cheaper. Then, during peak hours when electricity is more expensive, the
AC200P L seamlessly switches over to power your devices, helping you to save money on
your electricity bills.
•
PV Priority UPS Mode
The PV Priority UPS mode is better for regions with plenty of sunlight all the year. AC200P L
is mainly charged by solar energy to save power.
Note: When battery SOC is higher than the preset value, devices on AC outlets are
powered by PV and the battery together.
When battery SOC is lower than set value, the grid charges the battery and devices at the
same time.
•
Customized UPS Mode
Tailor your UPS settings to match your unique needs in this mode. Create personalized
schedules for charging and discharging, set battery SoC limits, and even control the grid
22
EN
JUST POWER ON