Klarstein WALLBERG Manual Del Usuario página 16

EN
16
DEVICE OVERVIEW
1 Overfilling prevention
2 Ice fill sensor
3 Intake manifold
4 Water tank
5 Drain plug
6 Ice outlet
7 Ice basket
8 Control panel
BEFORE FIRST USE
• During transport, the angle of inclination of the housing should not be more
than 45° and the ice maker should not be turned upside down. This could
damage the compressor and the sealed system.
• Remove all packaging materials and carefully inspect the ice machine to
ensure that it is in good condition, free of damage, and that the ice machine,
power cord, and plug are not damaged.
9 Front shell
10 Upper front cover
11 Lid on top back
12 Handle
13 Medium frame
14 Rear shell
15 Ventilation cover