Publicidad
Idiomas disponibles
Idiomas disponibles
Connection of pipelines
The dimension of multifunction valve & the inlet/outlet pipe is ½".
Connection of multifunction valve: install the multifunction valve with the heater
on the inlet of the water heater.
In order to avoid leakage when connecting the pipelines, the rubber seal gaskets
provided with the heater must be added at the end of the threads(see Fig. 3).
Ensure leak proof joints.
hot water outlet
screw for hot water outlet
cold water inlet
joint screw for cold water inlet
shower nozzle
Fig. 3
one-way safety valve
pressure release hole
EN
19
Publicidad
