Klarstein AQUAFINA Manual Del Usuario página 30

EN
30
Error codes
If the error occurs, please remember the code first and then turn off the device.
Call qualified personnel for help.
Code Possible reason
The tank is not completely
E1 filled by the water purifier
within 120 minutes.
Short circuit of NTC thermistor
E2
in supply water.
Outlet water short circuit of
E3
thermistor NTC.
The inlet water temperature
E4
was measured below 0-1°C.
An error was detected in the
E6
hardware heater board.
Ultra-temperature of the
E7
heating
parts.
Suggested action
Water leakage or lack of water
in the water tank.
Plug in terminal or replace
the thermistor NTC.
Plug in terminal or replace
the thermistor NTC
Use the device when the water
is 5°C or more.
Replace the part.
Please wait until the
temperature returns to
normal.