Igloo ICF 18 Instrucciones De Uso página 11

ICF18, ICF32, ICF40, ICF60, ICF80DZ
• Food may only be stored in its original packaging or in suitable
containers.
• Opening the cooling device for long periods of time can cause
significant increase of the temperature in the compartments of
the device.
• Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mold developing within the
device.
A
NOTICE! Damage hazard
• Check that the voltage specification on the data plate
corresponds to that of the energy supply.
• Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the
vehicle
– Or with the AC connection cable to an AC power supply
• Never pull the plug out of the socket by the cable.
• If the cooling device is connected to a DC outlet, disconnect the
cooling device and other power consuming devices from the bat-
tery before connecting a quick charging device.
• If the cooling device is connected to a DC outlet, disconnect the
cooling device or switch it off when turning off the engine.
Otherwise the battery may be discharged.
• The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
• The insulation of the cooling device contains flammable cyclo-
pentane and requires special disposal procedures. Deliver the
cooling device at the end of its life-cycle to an appropriate
recycling center.
• Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens, etc.).
EN
Safety instructions
11