cap.
5.Add fresh water to the water reservoir,up to the water level mark.
6.Plug the unit and repeat the Self-Clean process by repeating steps 3 to 5.
This will rinse out the vinegar/lemon residue.
7.After draining the water,replace and tighten drain cap.
8.Dry the interior and exterior with a clean,soft cloth.
NOTE: It is strongly recommended to clean the unit before initial use or
after the unit has not been in use for a long period of time.
2) Long-term storage of the ice maker
a) Unplug the power plug to cut off the power supply;
b) Turn off the water supply and remove the water inlet pipe;
c) Remove all ice cubes and drain the water ;
d) Wash and dry the inner walls of the storage tank and water tank.
No ice deflector
E1
detected
Common malfunction analysis
The ice guide plate
came off
Magnetic
switch damaged
The ice guide plate is
not reset
Reinstall the ice guide
sensitive
Replace
sensitive switch
Reset ice guide plate
- 14 -
the
magnetic