Publicidad
Idiomas disponibles
Idiomas disponibles
The place of installation
a)The appliance should be placed in a clean place with good ventilation,
which should be kept from sunlight and rain.
b) The machine cannot be placed near any heat source.
c) The ambient temperature around should not be lower than 3℃, not
higher than 40℃, and there is must be 15cm at least between the four
sides of the machine with the wall.
d) The machine should be placed in a flat place.
e) Do not place anything on top of the appliance.
Connect drainage pipe and water intake pipe
Warning:1)The machine can only connect with drinking water sources,and
must meet local drinking water standards
2)The water pressure must be in 0.1-0.4Mpa,if exceed 0.4Mpa,a pressure
reducing valve must be connected.
3) Drainage:The outlet of the drainage pipe must be lower than the outlet
on the machine
Please connect your ice maker with other parts by referring the diagram
below.
CONNECTING WITH WATER
- 8 -
Publicidad
