Publicidad
9
- Pull down on the shoulder adjustment straps to tighten. Adjust the yoke up
or down vertically and side to side. (41)
10
- Roll up the excess length of the shoulder adjustment straps and use the
elastic loop to wrap around the rolled up strap to store it out of the way. (42)
11
- Make sure your child is comfortable and securely seated in the baby carrier.
Adjust the straps around your child and check to make sure all buckles and
snaps are secure. Allow room for your child's head movements and keep
child's face free from obstructions. (43)
Accessories
Harness Covers
1
- Unbutton the head support and fold it down. (44)
2
- Store the extra length of the shoulder buckle adjustment in the pocket on
the shoulder buckle strap. (45)
3
- Slide the harness cover between the shoulder strap and the shoulder buckle
strap. (46)
4
- Slide the button on the shoulder buckle strap through the button hole on the
harness cover. (47)
5
- Attach the hook and loop. Make sure the bottom edge of the harness cover
is tucked behind the head support. (48)
6
- Repeat on the other side. When both harness covers are secure, attach both
bottom head support buttons into the button holes on the head support.
(49)
Hood
1
- Make sure the head support is up and secured in place with the upper head
support buttons. Undo the snap on the pocket located on the top edge of
the head support. (50)
2
- Pull the hood out of the hood pocket. (51)
3
- Adjust the hood to the desired position to shade your child. (52)
4
- Attach three snaps on the hood strap to the three snaps on the shoulder
strap. Repeat for the other side. (53)
Make sure the hood is not covering your child's mouth or laying too tightly
over their head.
15
LUUN™ instructions
Cleaning and Maintenance
Refer to the care label attached to the carrier fabric for washing and drying
instructions. Carrier MUST be washed inside a mesh laundry bag.
It is normal for fabric to fade from sunlight and to show wear and tear after a
long period of use, even when used normally.
For safety reasons, only use original Nuna parts.
Check regularly that everything functions properly. If any parts are torn, broken,
or missing, stop using this product.
NUNA International B.V. Nuna and all associated logos are trademarks.
LUUN™ instructions
16
Publicidad
