Publicidad
Idiomas disponibles
Idiomas disponibles
Power on/off the CP935W
Power on: Press the home key for 3 seconds or charge the CP935W.
Power off: Press the home key for 10 seconds then tap OK or tap More->Basic->Power
Off->OK on the LCD screen of the CP935W.
Select Mode
When the CP935W is powered on for the first time or reset to factory setting, the screen displays
DECT Mode and Wi-Fi Mode, choose one and click OK. If you want to switch modes, tap More-
>Basic->Phone Mode on the LCD screen of the CP935W.
Registration (DECT Mode)
You can register up to 10 CP935W to one W70B base station. Each CP935W can only be regis-
tered to one base station.
When the CP935W LCD screen prompts "Unregistered!", long press
the registration LED indicator flashes. There are two methods to register a new CP935W:
Easy Registration:
1. Tap Reg on the CP935W screen to register quickly.
Normal Registration:
1. Tap More->Basic->Registration->Register on the LCD screen of the CP935W. The CP935W
begins searching the base station.
2. Tap OK after searching a base station successfully (if it's not the base which you want to reg-
ister to, tap Next to search another base).
3. Enter the base station password (default: 0000), and then tap OK to complete the registration.
Note:
• If the CP935W is registered to the base station successfully, the LCD screen prompts
"Subscribe Succeeded".
• If the CP935W LCD screen prompts "Searching for Base", check whether the registration
LED indicator of your base station flashes.
on the base station till
3
E
N
G
L
I
S
H
Publicidad
