Descargar Imprimir esta página

Yealink CP935W Manual Del Usuario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Account Settings (DECT Mode)
E
N
Before you start using the CP935W, please set up your account via web user interface of the
base station. Follow the steps below:
G
1. Tap More->Status->Base Status->IPv4 on the LCD screen of the CP935W and access the
L
IP address with a browser (the default username and password are admin).
I
2. Go to Account->Register, select the account, enable Active Line, enter account information
S
and click Confirm.
H
If you don't know the server account, please contact the administrator to obtain the information.
Note:
When you enter the account information, the Display Name, Register Name, Username and
Server Host are required.
Wireless Network Connection (Wi-Fi Mode)
Please connect to a wireless network before using the CP935W. Follow the steps below:
1. Tap More->Basic->Wi-Fi on the LCD screen of the CP935W.
2. Turn Wi-Fi on. The CP935W will automatically search for available wireless networks in your
area.
3. Select an available wireless network to connect.
4. If the network is secure, enter its password in the Password field, and then tap Connect.
SIP Registration (Wi-Fi Mode)
Before you start using the CP935W, you also need to register via web user interface of the
CP935W, There are two methods to register the CP935W:
Register via the LCD screen:
1. Tap More->Advanced and enter the password (default: admin).
2. Go to Accounts, enable Active Line and enter account information.
If you don't know the server account, please contact the administrator to obtain the account
information.
Register via the web page:
1. Tap More->Status->General->IPv4 IP on the LCD screen of the CP935W and access the IP
address with a browser (the default username and password are admin).
2. Go to Account->Register, enable Active Line and enter account information.
If you don't know the server account, please contact the administrator to obtain the account in-
formation.
Note:
When you enter the account information, the Display Name, Register Name, Username and
Server Host are required.
4

Publicidad

loading