EN
Mounting front wheels & rear wheels
•
Insert the front wheels into the front axle until you
hear a click. Check that the front wheels are fully en-
gaged.
•
To remove the front wheels again, press the small
metal button (a) on the side of the front axle and pull
the wheels out of the axle.
•
You can lock or swivel the front wheels using the le-
ver (marked red) at the rear of the front axle.
•
Insert the rear wheels into the rear axle until you hear
a click. Check that the rear wheels are fully engaged.
•
To remove the rear wheels again, pull the metal lever
(b) on the top of the respective rear axle upwards and
pull the wheels out of the axle.
Brake
•
The brake is activated by pressing the brake pedal
downwards.
•
If you press the brake pedal upwards again, the
brake is released and you can continue driving.
- 16 -
b
a