Zehnder 655000885 Guía Para La Instalación Y El Usuario página 15

3. Disassembly and disposal
If the CO Sensor is disassembled, the waste disposal regulations applicable on site and
2
at the time of disassembly must be observed.
Dispose of the CO
of the device with household waste. The CO
collection point for electronic waste.
It is the responsibility of the owner of the CO
device responsibly.
4. Legend CO
Figure 4.1 ­ Front of CO
5. Commissioning CO
The type C CO Sensor directly controls the ventilation system using factory pre­set val­
2
ues. By default, the CO
C CO Sensor can be set using the ComfoControl App (installer menu) or the ventilation
2
unit display (installer menu). Other settings can also be changed via these menus. Please
refer to the installer manual and the ventilation unit manuals.
Sensor in an environmentally friendly way. Do not dispose
2
Sensor type C
2
Sensor
2
level is kept below 1050ppm. To use a different setpoint, the type
2
Sensor can be returned to a
2
Sensor to dispose of the
2
Sensor type C
2
Legend
1. Top LED
2. Middle LED
3. Bottom LED
4. Operating button
5. CO LED
2
EN - 15