Descargar Imprimir esta página

Craftsman 917.20385 Manual Del Operador página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Allow oneminute fortransmission to
warm up.Thiscanbedone during the
engine w arm upperiod.
Theattachments canalsobeused
during the engine warm-up period a fter
the transmission
has been w armed up.
MOWING
TIPS
• DO NOT use tire chains when the mower
housing is attached to tractor.
Mower should be properly leveled for best
mowing performance.
See "TO LEVEL
MOWER HOUSING"
in the Service and
Adjustments section of this manual.
The left hand side of mower should be
used for trimming.
Drive so that clippings are discharged onto
the area that has already been cut. Have
the cut area to the right of the tractor. This
will result in a more even distribution of
clippings and more uniform cutting.
When mowing large areas, start byturning
to the right so that clippings will discharge
away from shrubs,
fences,
driveways,
etc. After one or two rounds, mow in the
opposite direction making left hand turns
until finished.
If grass is extremely
tall, it should be
mowed twice to reduce toad and possible
fire hazard from dried clippings.
Make
first cut relatively high; the second to the
desired height.
Do not mow grass when it is wet. Wet
grass will plug mower and leave undesir-
able clumps.
Allow grass to dry before
mowing.
Always operate engine at full throttle
when
mowing
to assure
better mow-
ing performance
and proper discharge
of material.
Regulate ground speed by
selecting a low enough gear to give the
mower cutting performance as well as the
quality of cut desired.
• When operating
attachments,
select a
ground speed that will suit the terrain and
give best performance of the attachment
being used.
15

Publicidad

loading