Publicidad
Idiomas disponibles
Idiomas disponibles
i
i
J
I /_ WARNING:
BE SURE to read and understand
all instructions.
FaiFurs to follow all instructions
Fisted below may result in electric
shock, fire and/or serious personal injury.
WORK AREA SAFETY
1. ALWAYS keep your work area clean and well IlL Cluttered benches and
dark areas invite accidents.
2. DO NOT operate power tools in explosive atmospheres,
such as in the
presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes•
3. ALWAYS keep bystanders,
ehUdran, and visitors away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL
SAFETY
1. Doubts insulated tools are equipped with a polarized plug (one blade is
wider than the other.) This plug wilFf'd in a polarized outlet only one way.
if the plug does not fit fully In the outlet, reverse the plug. if it still does
not fit, contact a qualified electrician
to install a polarized outlet.
Do not change the plug in any way.
2. Double insulation [] eliminates the need for the three wire grounded power
cord and grounded power supply system. Applicable only to Class II
(doubre insulated) tools.
3. Before plugging in the tool, BE SURE that the outlet voltage supplied is
within the voltage marked on the tool's data plate, DO NOT use "AC only"
rated tools with a DC power supply.
4. ALWAYS avoid body contact with grounded surfaces,
such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is grounded.
5. If operating the power tool In damp locations Is unavoidable,
/
ALWAYS use a Ground Fault Circuit Interrupter to supply power to
your tool. ALWAYS wear electrician's
rubber gloves and footwear
in damp conditions,
6, DO NOT expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
7. DO NOT abuse the cord. NEVER use the cord to carry the tools or pull
the plug from the outlet. Keep cord away from heat, off, sharp edges or
moving parts. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
3
Publicidad
