Publicidad
Idiomas disponibles
Idiomas disponibles
Using the appliance
Switching on for the first time
INFORMATION!
If you do not press any key within 30 seconds and no program is activated, the oven will
automatically switch to standby mode. A clock will appear on the display unit. The appliance can
also be switched to standby mode if a cooking system has been selected, but the oven is not
active.
Keypad use
INFORMATION!
Please note that temperature will be rounded to the values of 5.
Settings
Choose settings by pressing the Cooking Time/Settings Mode key and holding it for 3 seconds.
Use the temperature settings keys to scroll through the menu. Use the time settings keys to change
value. Confirm any changes by pressing the Start key.
After connecting your appliance to the power for the first time, or after
an extended power outage, 12:00 will flash on display.
To activate the appliance, briefly press the Start key.
Keypad can be used to set temperature or time. For setting the
temperature simply write the value desired. To set the time first press
Cooking Time or
for time setting.
Setting the clock
World Time is always shown on the lower display. The first 2 digits are
hours and the third and fourth digits are minutes. Use the Keypad keys
to set the time. Confirm your selection with the Start key.
INFORMATION!
AM/PM is automatically changed when time exceeds 12:00.
Setting the volume
You can choose between three control unit volume levels, and silent
operation. Confirm your selection with the Start key.
INFORMATION!
When the silent operation is selected, oFF will appear at the bottom
of the display unit.
and for the next 10 seconds keypad will be used
EN 15
Publicidad
