Descargar Imprimir esta página

Mora MBE3502CAS Instrucciones De Uso página 30

Publicidad

Idiomas disponibles

Idiomas disponibles

Potential issues/troubleshoot
Only a service center authorized by the manufacturer during the warranty period may carry out
any repairs.
Before making any repairs, make sure the appliance is disconnected from the power mains by removing
the fuse or disconnecting the power plug from the wall outlet.
Any unauthorized repairs of the appliance may result in electric shock and short circuit hazard; therefore,
do not perform them. Leave such work to an authorized service technician.
In case of minor problems with appliance operation, check this manual to see if you can fix the problem
yourself.
Suppose the appliance is not operating properly or at all due to inappropriate operation or handling.
In that case, a visit from a service technician shall not be free of charge, even during the warranty
period.
Save the instructions for future reference and pass them on to any subsequent owners or users of the
appliance.
Troubleshooting table
Error name
Description
Err 001
Oven
temperature
sensor failure
Err 003
Communication
failure between
user interface
and power board
Err 004
Touch sensor
failure on user
interface
EN 30
Possible cause
Solution
Temperature
Check if the power cord connection is
sensor on the
correct.
appliance might
Colors of the power cord wires should
be malfunctioning.
match colors of the wires on the
appliance.
Disconnect the cooking range from the
power mains for a few minutes (undo
the fuse or switch off the main switch);
then, reconnect the cooking range to
the power mains. If the problem
persists, contact service.
Problem on
Disconnect the cooking range from the
appliance's
power mains for a few minutes (undo
electronics.
the fuse or switch off the main switch);
then, reconnect the cooking range to
the power mains. If the problem
persists, contact service.
Failure on touch
Clean user interface with dry cloth.
sensor.
Disconnect the cooking range from the
power mains for a few minutes (undo
the fuse or switch off the main switch);
then, reconnect the cooking range to
the power mains. If the problem
persists, contact service.

Publicidad

loading