Linsar E-DA77 Manual Original página 77

Explanation of symbols
The following symbols and signal words are used in this user manual, on the device or
on the packaging.
This symbol provides you with useful additional information on
handling and use.
Declaration of conformity (see chapter "Declaration of conformity"):
Products marked with this symbol meet all the applicable Community
regulations of the European Economic Area.
This symbol identifies devices that belong to the protection class II.
This symbol describes the polarity of the output voltage on the
connector.
The device is designed for interior use only.
DC voltage
This symbol provides information on the energy efficiency of external
power supplies.
Safety
The following signal words are used in this user manual.
WARNING!
CAUTION!
NOTE!
This signal symbol/word denotes a hazard with an
average risk level that could lead to death or severe
injury if it is not avoided.
This signal symbol/word denotes a hazard with a
low risk level that could lead to mild or moderate
injury if it is not avoided.
This signal word provides a warning about
potential material damage.
77